Members' Cabs...
- aerobert
- Posts: 375
- Joined: June 15th, 2018, 12:37 pm
- Location: Sweden
- eBay: romajoh
Re: Members' Cabs...
Looks good but that could easily be fixed by adding to the studs and insulate from inside, vapor barrier, and slap on some OSB or drywall (or both). That goes for the roof as well if you dont have anything there.
Flooring is trickier depending on the foundation but thick carpeting/vapor barrier and a dehumidifier will go a long way. Add some simple oil filled radiator on low setting and you will keep your stuff safe for along while. Not to mentioned added comfort.
Flooring is trickier depending on the foundation but thick carpeting/vapor barrier and a dehumidifier will go a long way. Add some simple oil filled radiator on low setting and you will keep your stuff safe for along while. Not to mentioned added comfort.
- Pete
- Retired
- Posts: 4302
- Joined: August 19th, 2008, 8:23 pm
- Location: Near London, UK
- eBay: arcave
Re: Members' Cabs...
The tiles I used have underlay attached so much thicker than normal:
https://www.milliken.com/en-gb/business ... ion-backed
Roof is insulated with the foil & wood lined, I did all the electrics myself which I found easier than the woodwork ect.
It's come a long way since the foundation was laid:
https://www.milliken.com/en-gb/business ... ion-backed
Roof is insulated with the foil & wood lined, I did all the electrics myself which I found easier than the woodwork ect.
It's come a long way since the foundation was laid:
You do not have the required permissions to view the files attached to this post.
Last edited by Pete on October 27th, 2023, 8:57 am, edited 8 times in total.
- NASguy
- Posts: 632
- Joined: March 4th, 2011, 3:37 am
- Location: Florida, USA
Re: Members' Cabs...
Pete can that Lindy run PS5?
- Pete
- Retired
- Posts: 4302
- Joined: August 19th, 2008, 8:23 pm
- Location: Near London, UK
- eBay: arcave
Re: Members' Cabs...
Prob as it has a newish screen but I don't really do consoles not had anything Sony since PS3.
I've owned a Switch though since launch.
For me adding credits & messing around with service menu's is all part of it.
I've owned a Switch though since launch.
For me adding credits & messing around with service menu's is all part of it.
- Pete
- Retired
- Posts: 4302
- Joined: August 19th, 2008, 8:23 pm
- Location: Near London, UK
- eBay: arcave
Re: Members' Cabs...
And then there was 2 !
You do not have the required permissions to view the files attached to this post.
- NASguy
- Posts: 632
- Joined: March 4th, 2011, 3:37 am
- Location: Florida, USA
Re: Members' Cabs...
Looks mint as hell
- yosai
- Windy City
- Posts: 4062
- Joined: August 17th, 2008, 5:00 pm
- Location: London
- eBay: yosai
Re: Members' Cabs...
Indeed. Looking forward to the next Pete's meat.
- geotrig
- Potato!
- Posts: 7539
- Joined: December 5th, 2008, 1:14 pm
- Location: ._.
- eBay: ._.
Re: Members' Cabs...
3 if you count the Mimi
<trk>:I remember catching a big fat one and my friend said "throw it back in, that one already tastes like wood"
- Pete
- Retired
- Posts: 4302
- Joined: August 19th, 2008, 8:23 pm
- Location: Near London, UK
- eBay: arcave
- MrSandman
- Posts: 348
- Joined: October 9th, 2010, 9:00 pm
- Location: Germany
- eBay: Not yet, not trading yet
- Initials: NOR
Re: Members' Cabs...
The Lindbergh's screen looks slimmer than the Noir's.
Which screen is better out of the two?
Which screen is better out of the two?
"Hans, I've just noticed something."
- Pete
- Retired
- Posts: 4302
- Joined: August 19th, 2008, 8:23 pm
- Location: Near London, UK
- eBay: arcave
Re: Members' Cabs...
Lindy has been upgraded to:
https://www.lg.com/hk_en/monitor/lg-32ML600M-B
Noir has a oem screen from 2010 behind the glass & looks quite dated compared to a modern screen but ok I may upgrade it in the future to 4k.
Noir were shipped with Sanwa LCD's from the factory but if this failed on site it would get replaced with a Wei-Ya.
Its going to be a dedicated Pi set-up for now.
https://www.lg.com/hk_en/monitor/lg-32ML600M-B
Noir has a oem screen from 2010 behind the glass & looks quite dated compared to a modern screen but ok I may upgrade it in the future to 4k.
Noir were shipped with Sanwa LCD's from the factory but if this failed on site it would get replaced with a Wei-Ya.
Its going to be a dedicated Pi set-up for now.
- FrancoB
- J+ member of the year finalist!
- Posts: 4761
- Joined: June 8th, 2009, 10:42 pm
- Location: Oxfordshire
- eBay: francosquashking
- Initials: FRN
Re: Members' Cabs...
Nice get Pete. Once you go Noir...
-
- Posts: 117
- Joined: November 6th, 2019, 5:40 am
- Location: Düsseldorf
- eBay: Larschance
- Initials: LSV
Re: Members' Cabs...
Noir is a really a nice cab. One I definitely miss. Why don’t you use the top marquee? Cause of the heights? Those are one reason I like those cabs, with artwork it looks amazing
- thegreathopper
- Geese's Bodyguard
- Posts: 1699
- Joined: August 17th, 2008, 6:56 pm
- Location: London
- eBay: thegreathopper
- Initials: STV
Re: Members' Cabs...
I quite like a marquee
- Pete
- Retired
- Posts: 4302
- Joined: August 19th, 2008, 8:23 pm
- Location: Near London, UK
- eBay: arcave
Re: Members' Cabs...
Never been a marquee person both the Lindy & the Noir holders are carefully stored in my loft.
Always slightly pointless on a multi home system having a marquee for one game too.
I do have a pic with it on the Lindy:
You do not have the required permissions to view the files attached to this post.
-
- Posts: 117
- Joined: November 6th, 2019, 5:40 am
- Location: Düsseldorf
- eBay: Larschance
- Initials: LSV
Re: Members' Cabs...
Yeah, if you don’t have a good artwork, it doesn’t look good. Right.
- Neo Gold
- Posts: 453
- Joined: October 28th, 2008, 10:25 pm
- Location: In my Garage..
- eBay: neo$gold
- Initials: N$G
Re: Members' Cabs...
Top new addition Pete! .. Looking minty .
Is that it now or can you squeeze in a Vewlix Tate?. .
Is that it now or can you squeeze in a Vewlix Tate?. .
WANTED! .. Any Tatty old candy cab!.
- Pete
- Retired
- Posts: 4302
- Joined: August 19th, 2008, 8:23 pm
- Location: Near London, UK
- eBay: arcave
Re: Members' Cabs...
It would be Vewlix hori if I did.
Is there even much 16:9 Tate software?
One thing I would like in the short term is a non rusty 1l6B cp as this Noir is going to be 1p only.
Is there even much 16:9 Tate software?
One thing I would like in the short term is a non rusty 1l6B cp as this Noir is going to be 1p only.
- Codiene
- Posts: 22
- Joined: November 27th, 2020, 6:46 pm
- Location: Somewhere, UK
- eBay: ebayID
- Initials: AAS
Re: Members' Cabs...
Looks great and I think you managed to get a very compact Hori sega astro in there too, No?
Just got one of those little Astro units cheap on e(vil)Bay too. I didn’t know of the Dottori Kun boards and that little bit of Sega’s history until I got one so I learnt something new as a result of getting one which is always nice.
Just got one of those little Astro units cheap on e(vil)Bay too. I didn’t know of the Dottori Kun boards and that little bit of Sega’s history until I got one so I learnt something new as a result of getting one which is always nice.
- d00mdrew
- Posts: 3
- Joined: November 19th, 2023, 3:37 am
- Location: United States
- eBay: andrewhalifko
- Initials: DRW
Re: Members' Cabs...
You do not have the required permissions to view the files attached to this post.