Taito Vewlix Cab Differences
- Ringtail
- Please Continue...
- Posts: 106
- Joined: August 17th, 2008, 8:18 pm
- Location:
Taito Vewlix Cab Differences
I remember before KC went down that someone had highlighted the differences between the original Vewlix and the new black and white model. Does anyone still have those details handy?
Last edited by Ringtail on August 22nd, 2008, 11:19 am, edited 1 time in total.
- Mayhem
- Posts: 264
- Joined: August 17th, 2008, 10:15 pm
- Location: Stockholm, Sweden
- eBay: Mayhem_SWE
- Contact:
Re: Taito Viewlux Cab Differences
Vewlix. Vewlix. Vewlix.
It's called the goddamn VEWLIX!
It's called the goddamn VEWLIX!
- mission
- Please Continue...
- Posts: 67
- Joined: August 17th, 2008, 4:02 pm
- Location: Westmidlands , UK
- Ringtail
- Please Continue...
- Posts: 106
- Joined: August 17th, 2008, 8:18 pm
- Location:
Re: Taito Viewlux Cab Differences
*cough* EditedMayhem wrote:Vewlix. Vewlix. Vewlix.
It's called the goddamn VEWLIX!
And thanks Mission
-
- Posts: 276
- Joined: August 20th, 2008, 4:37 pm
- Location: Austria
- eBay: redstallone
Re: Taito Vewlix Cab Differences
I`m wondering why the Vewlix Cabs don`t have an HDMI or DVI port, just VGA......that makes sense?!
- Ringtail
- Please Continue...
- Posts: 106
- Joined: August 17th, 2008, 8:18 pm
- Location:
Re: Taito Vewlix Cab Differences
Probably just based around their own hardware, I assume the Type X2 dosen't have them eitherredstallone wrote:I`m wondering why the Vewlix Cabs don`t have an HDMI or DVI port, just VGA......that makes sense?!
-
- Please Continue...
- Posts: 309
- Joined: August 20th, 2008, 11:46 am
- Location: OFFLINE
Re: Taito Vewlix Cab Differences
type X 2 and the "regular" Vewlix are DVI
type X 2 output from its graphics card is DVI, but uses a VGA gender convertor and as default the vewlix has only got a VGA cable connected up - the monitor can accept input either via its VGA port or DVI
type X 2 output from its graphics card is DVI, but uses a VGA gender convertor and as default the vewlix has only got a VGA cable connected up - the monitor can accept input either via its VGA port or DVI
- mufunyo
- Posts: 648
- Joined: August 21st, 2008, 12:26 am
- Location: Eindhoven, NL
- eBay: mufunyo
- Initials: MUF
Re: Taito Vewlix Cab Differences
Also, my Type-X (not X+ or X2) won't synch up over DVI-D, only DVI-A (which is equivalent to D-sub). I was pretty disappointed about that cause it takes away the entire advantage of using DVI in the first place. I think it has to do with Windows Embedded being profiled to a static hardware configuration, and DVI-D/DVI-A is usually autodetected by the ATI driver when you plug in the cable.
-
- Posts: 27
- Joined: August 31st, 2008, 6:44 am
- Location: USA
Re: Taito Vewlix Cab Differences
If I remember correctly (since I had a japanese guy at work translate that graphic for me) the only real differences between the full blown vewlix and the "light" vewlix were the lack of a power supply, lack of translucent red parts, and a cheaper monitor. I don't know how much worse the monitor is, or how much whatever power supply they are using is, but something tells me it's not worth 1500 dollars
Oh, and just in case someone else asks anything else about that graphic, the G and D cabinets are the namco and delta32 cabinets respectively if I'm not mistaken.
Oh, and just in case someone else asks anything else about that graphic, the G and D cabinets are the namco and delta32 cabinets respectively if I'm not mistaken.
- _xizor
- Please Continue...
- Posts: 143
- Joined: August 17th, 2008, 5:40 pm
- Location: Canada
Re: Taito Vewlix Cab Differences
Check out the Gallery.
I posted pics of a Vewlix F and a Vewlix L.... should keep the conversation going for a while...
I posted pics of a Vewlix F and a Vewlix L.... should keep the conversation going for a while...
- _xizor
- Please Continue...
- Posts: 143
- Joined: August 17th, 2008, 5:40 pm
- Location: Canada
Re: Taito Vewlix Cab Differences
Ask and you shall eventually receive...
Here are the differences...
POWER SUPPLY (JAMMA SPEC)
Vewlix-F = EQUIPPED
Vewlix-L = OPTION
EEFL UNIT INSIDE CONTROL PANEL
(BACK LIGHT FOR PLAY INSTRUCTION)
Vewlix-F = EQUIPPED
Vewlix-L = NONE
LED-PCB FOR LIGHTING INSIDE TITLE
PANEL OF THE UPPER PART
Vewlix-F = EQUIPPED
Vewlix-L = NONE
AC POWER SWITCH
Vewlix-F = THE FRONT & BACK
Vewlix-L = THE FRONT ONLY
WOOD ELECTRIC BOARD OF THE BOTTOM
Vewlix-F = YES
Vewlix-L = YES, BUT A LITTLE SMALLER THAN "F"
LENGTH OF AC CORD
Vewlix-F = 3m
Vewlix-L = 2m
LCD PANEL
Vewlix-F = SANWA LCD
Vewlix-L = NON-SANWA - RESPONSE SPEED IS A LITTLE SLOWER THAN "F" (As in higher Milliseconds)
Here are the differences...
POWER SUPPLY (JAMMA SPEC)
Vewlix-F = EQUIPPED
Vewlix-L = OPTION
EEFL UNIT INSIDE CONTROL PANEL
(BACK LIGHT FOR PLAY INSTRUCTION)
Vewlix-F = EQUIPPED
Vewlix-L = NONE
LED-PCB FOR LIGHTING INSIDE TITLE
PANEL OF THE UPPER PART
Vewlix-F = EQUIPPED
Vewlix-L = NONE
AC POWER SWITCH
Vewlix-F = THE FRONT & BACK
Vewlix-L = THE FRONT ONLY
WOOD ELECTRIC BOARD OF THE BOTTOM
Vewlix-F = YES
Vewlix-L = YES, BUT A LITTLE SMALLER THAN "F"
LENGTH OF AC CORD
Vewlix-F = 3m
Vewlix-L = 2m
LCD PANEL
Vewlix-F = SANWA LCD
Vewlix-L = NON-SANWA - RESPONSE SPEED IS A LITTLE SLOWER THAN "F" (As in higher Milliseconds)
Last edited by _xizor on September 6th, 2008, 3:34 pm, edited 1 time in total.
-
- Please Continue...
- Posts: 6
- Joined: September 5th, 2008, 5:24 am
- Location:
Re: Taito Vewlix Cab Differences
Do you mean that the grey to grey response time is higher on the L or that there is less input delay?
- Ringtail
- Please Continue...
- Posts: 106
- Joined: August 17th, 2008, 8:18 pm
- Location:
Re: Taito Vewlix Cab Differences
_Xizor Thank you
People have the right to be stupid, but some abuse that privilege.
- RHADAMANTHE
- Please Continue...
- Posts: 2
- Joined: September 2nd, 2008, 2:23 am
- Location: France
Re: Taito Vewlix Cab Differences
For the lcd pannel , on my vewlix L cab it is GTT and samsung for the dale .
- _xizor
- Please Continue...
- Posts: 143
- Joined: August 17th, 2008, 5:40 pm
- Location: Canada
Re: Taito Vewlix Cab Differences
The Vewlix F SANWA monitor *apparently* has a lower millisecond response then the Vewlix L monitor.
...but they still have not given me the spec...
...but they still have not given me the spec...